CORESTONE TRUE

Installation Guidelines

• For best results, make sure to always work from 2 to 3 cartons at a time, mixing the planks during the installation
• Wood Subfloor – Inspect your subfloor before you begin, level to 3/16″ within 10′
• Concrete Subfloor – Floors must be fully cured, at least 60 days old
• Concrete substrates must be flat within 1/8″ within a 6′ radius, the substrate should not slope more than 1″ per 6′ in any direction.
• Radiant Heat systems must have a minimum of 1/2″ separation from the product & maximum operating temperature should never exceed 30 C
• Radiant heat should turn heat off 24 hours before, during and 24 hours after installation when installing over radiant heated subfloors.
• Make sure that the temperature in the room is at least 15 C during installation.
• Don’t install over; hardwood flooring, carpet, cushion-backed vinyl flooring or any type of floating flooring.
• Ensure to leave 1/4″ gap between walls and fixtures such as pipes and pillars, stairs, etc.
• The end joints of the planks should be staggered a minimum of 8″ apart.
• Avoid installing pieces shorter than 12″ at beginning or end of rows.
• Do Not install your kitchen cabinets directly over your floor.

Please note these are just some important take away and the installer should take the time to read the instructions  in depth that come with the product!