Metallic Paint “Copper” by Fusion

Description

Our top seller, the Copper Metallic is a striking deep burnt sienna colour.  Use with dry-brushed accents of Fusion™ Ceramic to create a faux Copper patina effect.

Base : water based
Coverage : approx. 6-7 sqft per 37 mL
Finish/sheen : Matte with mica pigments for shimmer

Clean up : water
Dry time : 30 min approx.
Recoat time : 1-2 hours approx.
Cure time : 21 days approx.

Prep:
Clean your piece with Fusion’s TSP Alternative to remove grease and dust.
Remove Wax (if needed):
Use Odourless Solvent to remove any wax coating.
Light Scuff Sanding (if needed):
Sand high gloss finishes to dull the sheen.
Paint:
Choose any Fusion colour and paint beautiful.
Metallics:
Our metallics are made with real mica for a beautiful shimmer, for best results use a base coat similar to the metallic colour for excellent coverage. e.g. Brushed Steel use Little Lamb or Soap Stone, Copper use Tuscan Orange or Fort York Red, Pearl use any of our whites as a base coat.
Note: Priming is usually not necessary with Fusion Mineral Paint. For bleed-through or knots, use Zinsser BIN Shellac-based primer. For dark-to-white transitions, use a mid-tone colour like Sterling as a primer.